DeWalt DW682K Instrucciones De Segurida Y Instrucciones Para El Uso página 19

BISCUIT JOINTER DW682K
Congratulations!
You have chosen a D WALT Power Tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional Power Tool users.
Table of contents
Technical data
EC-Declaration of conformity
Safety instructions
Package contents
Description
Electrical safety
Mains plug replacement (U.K. & Ireland only)
Using an extension cable
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Voltage
(U.K. & Ireland only)
Power input
No load speed
Depth of cut, max.
Plunge depth adjustment
Cutter diameter
Cutter width
Weight
Fuses:
Europe
U.K. & Ireland
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
EC-Declaration of conformity
DW682K
D WALT declares that these Power Tools have been designed in
E
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 50144,
EN 55104 / EN 55014-2, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
or refer to the back of themanual.
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
measured according to EN 50144:
L (sound pressure)
pA
L (acoustic power)
WA
* at the operator's ear
11
WALT one of the most
E
DW682K
V 230
V 230/115
W 600
min -1 10,000
mm 22
mm 8/10/12 (for biscuits 0/10/20)
mm 100
mm 4
kg 3
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
WALT at the address below,
E
DW682K
dB(A)* 90.9
dB(A) 104
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to EN 50144:
en - 1
en - 1
en - 1 Director Engineering and Product Development
en - 2 Horst Großmann
en - 2
en - 2
en - 2
en - 3
en - 3
en - 4
en - 5 D WALT, Richard-Klinger-Straße 40,
E
en - 5 D-65510, Idstein, Germany
Safety instructions
When using Power Tools, always observe the safety regulations
applicable in your country to reduce the risk of fire, electric shock
and personal injury. Read the following safety instructions before
attempting to operate this product.
Keep these instructions in a safe place!
General
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose Power Tools to humidity. Keep work area well lit. Do
not use Power Tools in the presence of flammable liquids or gases.
3 Guard against electric shock
Prevent body contact with earthed surfaces (e.g. pipes, radiators, cookers
and refrigerators). For use under extreme conditions (e.g. high humidity,
when metal swarf is being produced, etc.) electric safety can be improved
by inserting an isolating transformer or a (FI) earth-leakage circuit-breaker.
4 Keep children away
Do not let children come into contact with the tool or extension cord.
Supervision is required for those under 16 years of age.
5 Extension cords for outdoor use
When the tool is used outdoors, always use extension cords intended
for outdoor use and marked accordingly.
6 Store idle tools
When not in use, Power Tools must be stored in a dry place and
locked up securely, out of reach of children.
7 Dress properly
Do not wear loose clothing or jewellery. They can be caught in moving
parts. Preferably wear rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering to keep long hair out
of the way.
8 Wear safety goggles
Also use a face or dust mask in case the operations produce dust or
flying particles.
9 Beware of maximum sound pressure
Take appropriate measures for the protection of hearing if the sound
pressure of 85 dB(A) is exceeded.
10 Secure workpiece
Use clamps or a vice to hold the workpiece. It is safer and it frees both
hands to operate the tool.
E N G L I S H
DW682K
< 2.5 m/s 2
en - 1