Mellerware CAPRI 3000W Manual De Instrucciones página 5

appliance if the surface is dirty. When the appli-
ance re-heats the dirt will become more difficult to
remove.
5. Anomalies and repair
5.1. Take the appliance to an authorised support
centre if product is damaged or other problems
arise.
5.2. If the connection to the mains has been dam-
aged, it must be replaced and you should proceed as
you would in the case of damage.
6. Trouble shooting
E0 No cooking pot is on the cooking
surface or the pot is made from
unsuitable materials for the induc-
tion cooker.
E1 Voltage is below 100V
E2 Voltage is above 270V
E3 Temperature detector of the plate
has short circuited or overheated.
E4 IGBT thermostat is open
E5 The temperature detector of radiator
has short circuited or overheated.
E6 IGBT thermostat has overheated
E7 Surface thermistor malfunction
46043.indd 5
All manuals and user guides at all-guides.com
Place suitable cooking equipment on the plate.
Ensure that the appliance is connected to a volt-
age indicated on the rating label.
Ensure that the appliance is connected to a volt-
age indicated on the rating label.
Wait for the unit to cool down, if the problem
persists take the appliance to an authorised sup-
port centre.
Take the appliance to an authorised support
centre.
Wait for the unit to cool down, if the problem
persists take the appliance to an authorised sup-
port centre.
Wait for the unit to cool down, if the problem
persists take the appliance to an authorised sup-
port centre.
Take the appliance to an authorised support
centre.
2019-03-04 12:20:16 PM