Troubleshooting - Krups KH31 Manual De Instrucciones

„ „
Before removing the crumb tray, let the toaster cool down for at least ten
minutes after the last use.
„ „
Before maintenance, cleaning or putting the appliance away, unplug from the mains
supply and let the appliance cool down.
„ „
Cleaning is quick and easy thanks to the crumb tray. Just pull the handle that is
provided for this purpose. Carry out this operation regularly (Fig. 12).
„ „
Never immerse the toaster in water or any other liquid to clean it.
„ „
Never use an abrasive sponge to clean the toaster. Clean it with a damp cloth and
wipe it with a soft, dry cloth.
„ „
Wipe using a warm cloth and then put the crumb tray back in place.
„ „
Never use the toaster without the crumb tray.
PROBLEM
The toaster does not work. Make sure the plug is well connected to the power
Bread remains stuck in the
appliance.
The bread is over-toasted
or under-toasted.
The bread will
out almost immediately
without being toasted.
The toaster is emitting
smoke.
The cord is damaged.
CLEANING

TROUBLESHOOTING

outlet.
If the toaster still does not work, take it to a certified
KRUPS service centre.
Unplug the toaster and let it cool down. Remove the
bread out carefully. Make sure you do not damage the
heating elements when you remove the bread. Never
use a metallic object to remove the bread.
Check the selected setting. Select a lower level if your
bread is over-toasted, or a higher level if it is under-
toasted.
Makes sure the defrost or reheat buttons have not been
selected.
come Make sure you fully push down the lever to the bottom.
Also check that the reheat button has not been selected.
If the bread is still not in the toaster, take your toaster to
a certified KRUPS service centre.
Perhaps the setting level is too high or the toaster
requires cleaning. Press the STOP button to interrupt
the toasting and unplug the toaster.
If the toaster cord is damaged, it must be replaced at a
certified KRUPS service centre.
SOLUTION
3