Before Use; Operation; Recommendations For Use; Cleaning And Maintenance - cecotec TitanMill 200 Manual De Instrucciones

ENGLISH
ADVICE: There exist potential injury from misuse.

2. BEFORE USE

1. After removing the packaging, make sure the product is complete and undamaged and that
all accessories are present. Do not use the appliance if it is visibly damaged. Contact with the
technical assistance service.
2. Connecting the appliance. Check that the mains power supply voltage corresponds to
the value indicated on the rating label. If the power socket does not match the plug on the
appliance, have the socket replaced with a suitable type, or change the plug by a qualified
professional.

3. OPERATION

1. Place the appliance on a flat surface.
2. Turn the container lid in an anti-clockwise direction and lift it.
3. Pour the desired amount of coffee beans into the container.
4. Tighten the lid by turning it fully home in a clockwise direction. A safety device prevents
switch-on if the lid is not well inserted.
5. Do not attempt operation without the cover being in place.
6. Extract the necessary amount of wire and introduce the plug into the socket.
7. Press lid to active the coffee grinder and hold it down until the desired level of grinding is
obtained.
8 Unplug the unit, have a container ready to hold your ground coffee.

4. RECOMMENDATIONS FOR USE

1. Always keep the lid of bean container closed hermetically in order to preserve the flavor and
the aroma of the coffee beans.
2. Only grind the amount of coffee necessary at the time.
3. Never overfill the bean container.
As per general indications, consider one tablespoon of beans per cup (e.g. 4 spoons of coffee
beans for 4 cups). Naturally, optimal amounts, defined on the basis of personal taste, will be
identified with time.
4. Coffee grounds left in your grinder can become stale and affect the flavor of freshly. Be
sure to clean grinding bowl, blades and cover after each use.
5. This grinder can only handle dry, brittle foods. Do not grind oil seeds (e.g. peanuts) or hard
products (e.g. rice).

5. CLEANING AND MAINTENANCE

1. Be sure to unplug this appliance before cleaning. To protect against electrical shock, do not
immerse cord, plug or unit in water or liquid.
2. Remove ground coffee residues using the brush. Do not touch the blade because it is sharp.
3. Do not immerse into water.
TitanMill 200
10