Package Contents; Installation Environment; Quick Install - Interlogix TruVision NVR 71 Guia De Inicio Rapido

Tabla de contenido
Figure 2: TVN 71 front panel
1
Status LEDs:
Power: A steady GREEN light indicates that the
recorder is operating correctly. A RED light
indicates a fault.
Event Alarm: A blinking RED light indicates that
there is a sensor Alarm Input or another alarm
such as motion or tampering. No light indicates
no alarm.
HDD: A blinking RED light indicates that the
recorder is accessing the HDD in a read or write
operation. A steady RED light indicates HDD
failure. No light indicates that the unit is in idle
state.
Tx/Rx: A GREEN light indicates a normal network
connection. A blinking RED light indicates a
normal network connection when not all of the
eight network ports are in multi-address mode. No
light indicates that the recorder is not connected
to any network.

Package contents

The TruVision NVR 71 (model TVN 71) is
shipped with the following items:
AC power cords
Recorder
Hard drive kits
CD with software and manuals
TruVision NVR 71 Quick Start Guide
TruVision NVR 71 User Manual (on CD)
TruVision Recorder Operator Guide (on
CD)
2
Technical Alarm: A steady RED light indicates
that there is a technical alarm form the
recorder. No light indicates that there is no
alarm.
2. Front panel lock: You can lock or unlock the
front panel with a key. It provides access to the
HDDs.
3. Export log button: Insert a USB stick into one
of the front panel USD ports. Press the button
to export the log file of the recorder for all
channels (format .txt). The download file has
the log information for the past 24 hours from
when you press the button. The name format is
YYYYMMDDHHMM.txt.
4. USB 3.0 port: There are two USB ports. Use
the USB port to archive video and upgrade
firmware.

Installation environment

Refer to the user manual for detailed
information, but observe these important
requirements:
Place the unit in a secure location.
Ensure that the unit is in a well-ventilated
area.
Do not expose the unit to rain or moisture.

Quick install

The recommended steps for setting up the
recorder:
1. Connect all the required devices required
to the back panel of the recorder. See
Figure 1 on page 1.
TruVision NVR 71 Quick Start Guide
Tabla de contenido
loading

Tabla de contenido