Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
Chuck size: 10 mm
Direction of rotation: right / left
Max. Speed: 1800 rpm
Air consumption: 102 l/min (3.6 cfm)
Working pressure: 6.2 bar (90 psi)
Air inlet: 1/4"
Sound pressure level (LpA): 90.8 dB(A)
Sound power level (LwA): 101.8 dB(A)
Vibration level (ahd): 1.2 m/s²
Vibration level (K): 0.61 m/s²
Recommended hose diameter: 10 mm (3/8")
Net weight: 1.13 kg
Length: 192 mm
Height: 150 mm
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This pneumatic drill machine with reversible direction of rotation is used to drill holes in workpieces
and to drill out studs and screws.
SAFETY INFORMATIONS
When using pneumatic tools, fundamental precautionary measures must always be ensured in order
to reduce the risk of personal injury and property damage.
• Keep children and unauthorised persons away from the work area.
• Do not let any children play with the tool or its packaging.
• Make sure that the work area is sufficiently illuminated.
• Keep the work area clean, organised, dry and free from other materials.
• Do allow untrained persons work with this tool set.
• Ensure that the trigger is located in the OFF position when being connected to the compressed
air system.
• Do not carry out any modifications on the tool.
• Use only accessories that are dimensioned for use with compressed air tools, e.g. with impact
wrenches, for manual use do not use conventional sockets, use only power sockets.
• Disconnect the tool from the compressed air supply before installing accessories, when carrying
out maintenance work or the device is not being used.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Pneumatic Drill Machine
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 3335
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
