Husqvarna TS 148XK Manual Del Usuario página 9

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Fuel is flammable and the fumes are explosive.
Be careful with fuel to prevent injury, fire and
explosion.
Do not breathe in the fuel fumes. The fuel fumes
are poisonous and can cause injury. Make sure
that the airflow is sufficient.
Do not remove the fuel tank cap or fill the fuel
tank when the engine is on.
Let the engine become cool before you refuel.
Do not fill fuel in an indoor area. Not sufficient
airflow can cause injury or death because of
asphyxiation or carbon monoxide.
Do not smoke near the fuel or the engine.
Do not put hot objects near the fuel or the
engine.
Do not fill fuel near sparks or flames.
Before you refuel, open the fuel tank cap slowly
and release the pressure carefully.
Fuel on your skin can cause injury. If you get fuel
on your skin, use soap and water to remove the
fuel.
If you spill fuel on your clothing, change clothing
immediately.
Do not fill the fuel tank fully. Heat causes the fuel
to expand. Keep a space at the top of the fuel
tank.
Tighten the fuel tank cap fully. If the fuel tank cap
is not tightened, there is a risk of fire.
Before you start the product, move the product to
a minimum of 3 m/10 ft from where you refueled.
Do not start the product if there is fuel or engine
oil on the product. Remove the unwanted fuel
and engine oil and let the product dry before you
start the engine.
Examine the engine for leaks regularly. If there
are leaks in the fuel system, do not start the
engine until the leaks are repaired.
Do not use your fingers to examine the engine
for leaks.
Keep fuel in approved containers only.
When the product and fuel is in storage, make
sure that fuel and fuel fumes cannot cause
damage.
Drain the fuel in an approved container outdoors
and away from sparks and flames.
Battery safety
WARNING: A damaged battery can
cause an explosion and cause injury. If
the battery has a deformation or is
damaged, speak to an approved
Husqvarna service agent.
WARNING: Read the warning
instructions that follow before you use
the product.
Use protective glasses when you are near
batteries.
1717 - 001 - 10.09.2021
Do not wear watches, jewelry or other metal
objects near the battery.
Keep the battery out of reach for children.
Charge the battery in a space with good airflow.
Keep flammable materials at a minimum
clearance of 1 m when you charge the battery.
Discard replaced batteries. See
page 34 .
Explosive gases can come from the battery. Do
not smoke near the battery. Keep the battery
away from open flames and sparks.
Transport safety
Use an approved transport vehicle for
transportation of the product.
A markets national or local regulations can set
limit to the transportation of the product.
The operator of the transport vehicle is
responsible to attach the product safely during
Transportation on page 34 .
transport. Refer to
Safety instructions for maintenance
WARNING: The product is heavy and
can cause injury or damage to property
or the adjacent area. Do not do
maintenance on the engine or the cutting
deck without these conditions:
The engine is off.
The product is parked on a level
surface.
The parking brake is applied.
The ignition key is removed.
The cutting deck is disengaged.
The ignition cables are removed from
the plugs.
WARNING: The exhaust fumes from the
engine contain carbon monoxide, an
odorless, poisonous and very dangerous
gas. Do not run the product in closed
spaces or spaces with not sufficient air
flow.
WARNING: Read the warning
instructions that follow before you do
maintenance on the product.
For best performance and safety, do
maintenance on the product regularly as given in
the maintenance schedule. Refer to
schedule on page 18 .
Electrical shocks can cause injuries. Do not
touch the cables when the engine is on. Do not
do a function test on the ignition system with your
fingers.
Do not start the engine if the protective covers
are removed. There is a high risk of injury
caused by moving or hot parts.
Disposal on
Maintenance
9

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido