Commercial Electric 55702141 Guía De Uso Y Cuidado página 2

2. Attach the S hook (BB) at the bottom of the mounting chain (AA) to the hanger on the shop light (A). Repeat this step on the
other side of the fixture. Then close all hooks with pliers to secure them.
3. Hang the shop light (A) by placing one chain (AA) over each hook (not included) that has been installed on the ceiling.
4. Adjust chains to level light. The fixture must hang at least 3 in. from the ceiling.
NOTE: If using eye hooks in the ceiling instead, two optional S hooks are provided for hanging the fixture.
5. Plug the electrical plug adapter into an electrical outlet.
6. Pull the chain down to turn the light on and off.
CAUTION: When suspension mounting, make sure the light fixture is
located directly below the electrical outlet.
Excess cord should be secured to the mounting chain (AA)
with the cable tie (not included).
AA
BB
Hanger
Hook
BB
AA
A
Chain
2
A