Fein Dustex 35 LX Serie Manual Del Usuario página 36

OBJ_BUCH-0000000225-001.book Page 36 Monday, October 12, 2015 1:39 PM
en
36
Lock the lockable castors when trans-
porting the vacuum cleaner in vehicles
(see page 8).
Carry the vacuum cleaner only by the
handle, not by the push bar.
Only for Dustex 35 MX (**): Seal off the
vacuum connection with the plug (see
page 18).
Repair and customer service.
Prior to any maintenance and clean-
ing, disconnect the vacuum cleaner
from the power source (pull mains
plug).
Check the connections, seals and
hoses. Have damage repaired only
through a qualified repair person and
only using original FEIN replacement
parts.
Only for Dustex 35 MX (**): For trans-
port and maintenance of the vacuum
cleaner, seal off the vacuum connec-
tion with the plug (see page 18).
Use commercially available, non-
scouring cleaning agents and water for
cleaning the vacuum cleaner. After
cleaning, allow the vacuum cleaner to
dry completely.
Empty the container each time
after using and remove coarse
debris and dust.
Empty the container after vacuuming
liquids. Afterwards, run the vacuum
cleaner with the accessories con-
nected for several minutes in order to
dry them.
Dispose of used flat-fold filters and fil-
ter bags according to statutory regula-
tions.
When replacing the power cable is
required, have this carried out by
FEIN or by an authorized FEIN
Service Agent, in order to avoid
hazardous situations.
Have a dust-technical inspection car-
ried out at least once every year by
the manufacturer or an instructed
person, e. g. for damage of the filter,
function and tightness against leakage
of the vacuum cleaner as well as func-
tion of the control/monitoring unit
(for Dustex 35 MX (**)).
For category L and M vacuum cleaners
that were in contaminated environ-
ments, the exterior as well as all
machine parts should be cleaned or
treated with sealants. When perform-
ing maintenance and repair work, all
contaminated components that can-
not be cleaned to satisfactory must be
disposed of. Such components must
be disposed of in impermeable plastic
bags conforming with the valid regula-
tions for the disposal of such waste.
For maintenance on behalf of the user,
the vacuum cleaner must be disassem-
bled, cleaned and maintained as far as
feasible, without causing a risk for the
maintenance personnel or other per-
sons. Prior to disassembly, the vac-
uum cleaner should be cleaned in
order to prevent any risks.
The room/enclosure in which the
vacuum cleaner is disassembled should
be well ventilated. Wear personal
protective equipment during mainte-
nance. After the maintenance, the
maintenance area should be cleaned.
The current spare parts list for this
vacuum cleaner can be viewed on the
Internet at www.fein.com.