Cleaning And Maintenance; Technical Specifications - Perel GIK20 Manual Del Usuario

6. Operation
6.1 Insect Killer
1.
Fully charge the unit (5 hours) before using it. Connect the power
adapter to the insect killer, and connect to the mains.
2. Install the device in the darkest place in the room, at a height of 50 to
100 cm above the ground.
3. Close all windows and doors in the room. Switch on the insect killer
function (UV LEDs).
4. Switch off after use.
6.2 Emergency Light
1. Make sure the device is sufficiently charged.
2. Switch on the emergency light function (white LEDs). Press the on-off
switch twice.
3. Switch off after use.

7. Cleaning and Maintenance

Warning! Never touch the metal grid with your bare hands. If you
need to clean the tray, follow the safety instructions carefully.
The cleaning frequency depends on the intensity of use. Check the tray of
the device at least once a week. Clean more often if necessary.

8. Technical Specifications

effective area ................................................................ 80 m²
LED working life .......................................... up to 50 000 hours
power adapter
input ..................................... 100-240 V~, 50/60 Hz, 100 mA
output ......................................................... 5 VDC, 500 mA
UV-A LED
number ................................................... 5 (not replaceable)
total power consumption ............................................. 1.3 W
white LEDs
number .................................................. 10 (not replaceable)
total power consumption ............................................. 1.5 W
V. 01 – 02/12/2015
GIK20
5 ©Velleman nv