OPERATING INSTRUCTIONS
The appliance is only intended for the treatment of human hair.
Do not use it for wigs and animals.
1. Gently dry your hair with a towel after washing.
2. Comb your hair. Do not use hair spray or other flammable substances.
3. Unfold the power cord completely. Connect the appliance plug to the mains.
4. Use the controller (4) to select the desired airflow speed.
1st stage = the appliance is switched off
2nd stage = strong airflow, low temperature
3rd stage = low airflow, high temperature
4th stage = strong airflow, high temperature
5. During hair drying, use a comb to model your hairstyle. Keep a safe distance to prevent hair and skin burns or hair
being sucked into the appliance inlet grille.
6. COOL SHOT function (cold airflow) - helps cool hair quickly and fix hairstyle better. Press the button (3) to activate
this function.
7. If you put the appliance down during use, always switch it off.
8. Removable concentrator allows to direct a narrow stream of air to the comb or brush to adjust the hairstyle.
9. Switch off the appliance after use.
10. If you use the appliance in the bathroom, be sure to switch it off and unplug it immediately after use, as the proximity
of water and the appliance's contact with water is very dangerous, even when the appliance is turned off!
11. The hanging loop is used for hanging the appliance during storage.
12. The appliance is equipped with an ionisation function that starts automatically.
CLEANING AND MAINTENANCE
WARNING!
Before each cleaning of the appliance, unplug the power cord from the electrical outlet!
Make sure the appliance has cooled before handling it!
To clean the surface of the appliance, use only a damp cloth, no detergents or hard objects, as they can damage the
surface of the appliance!
Check the cleanliness of the inlet and outlet grilles after each use. If necessary, remove the inlet grille, clean it and
reattach it.
Never clean the appliance under running water, do not rinse it or immerse it in water!
VV5750
EN
37