Sanyo AVM-3651G Manual Del Propietário página 6

QuickTips
Point the remote
control toward the
equipment you want to
operate. Objects
between the remote
and the equipment
may cause misopera-
tion of the remote
control function.
Make sure batteries
have been installed
correctly.
If the remote control
does not work: Press
TV key (see item 1).
The remote control
must be programmed
before it will operate
your VCR, DVD, or
Cable Box. See
pages 7~8.
Cannot select channel
with number keys.
Press "0" in front of
numbers 1 ~ 9.
Example: Channel 05.
The "C" in front of the
channel number indi-
cates a Cable channel.
Adjusting the volume
level: Right flashing
arrow indicates
volume is increasing
and left flashing arrow
indicates volume is
decreasing.
Channel number will
not display continu-
ously when captioning
is on.
Using V-Guide
TV Parental Guide-
lines settings can be
changed only by using
the Remote Control.
See pages 16 and 17.
6
MULTIMEDIA REMOTE CONTROL KEYS
Point towards TV
VCR TV
POWER
INPUT
1 2
1 2
4 5
4 5
7 8
7 8
CAPTION
0
0
MENU
CH
VOL
MUTE
PLAY
REC STOP
V-GUIDE
Mode Keys
Use these keys to program the remote
control and to select the operating
mode (VCR, TV, or AUX).
Input Key
Press to select the program source to
be displayed on the screen: TV signal
or signal from the equipment you have
connected to the A/V jacks.
Number Keys
Two keys must be pressed to select a
channel. Example: Press 0 then 6 to
select channel 6. For cable channels 100 through 125, press and hold the
1 key until C1– – appears. Then press
the other two numbers.
Caption Key (See page 14.)
Menu Key
Use this key with the
AUX
features of the on-screen menu system
(see pages 9 ~ 11).
RESET
Channel (CH) Scanning (
and Volume (
3
3
11
Press to scan through the channels in
memory and to adjust the volume.
6
6
Mute Key
9
9
Press once to turn off the volume.
SLEEP
Press again to restore.
12
Note: When using the audio out jacks
RECALL
this key will not mute the sound in the
13
fixed mode, but will mute the sound in
VOL
the variable mode.
VCR Keys
These keys control the VCR's Fast
DISPLAY
14
Forward (
Play (
Stop (
PAUSE
functions.
V-Guide Key (See pages 15 ~17.)
Reset Key
Press this key twice to restore factory
settings. The TV will automatically
start Channel Search and clear all
customized settings. (See page 12.)
11
Power Key
Press to turn TV on or off.
12
Sleep Key
Use this key with the "0" key to set the
Sleep Timer (see page 18).
13
Recall Key
Select a channel then select another
channel using the number keys. Press
Recall to switch between the channels.
14
Display Key
Press once to display the channel
number and time. Press twice to
display the channel number continu-
ously. Press again to remove the
display.
/
/ keys to navigate and adjust
/ ) Keys
), Rewind (
), Record ( ),
), and Pause (
and
/ )
),
)