Dmx Linking; Infrared Remote Control 6 (Irc-6) - Chauvet DJ Intimidator Wash Zoom 250 IRC Guía De Referencia Rápida

EN Intimidator™ Wash Zoom 250 IRC QRG

DMX Linking

The Intimidator™ Wash Zoom 250 IRC can work with a DMX controller
when linked by DMX serial connections. Instructions for connecting and
configuring this product for DMX operation are in the User Manual. If you
are not familiar with DMX, download the DMX Primer from
www.chauvetlighting.com.
Starting
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 499.
Address
Master/Slave
The Intimidator™ Wash Zoom 250 IRC uses the DMX data connection for
its Master/Slave mode. Instructions for connecting and configuring this
Connection
product for Master/Slave operation are in the User Manual.
Infrared Remote
The Intimidator™ Wash Zoom 250 IRC is compatible with the Infrared
Control 6
Remote Control 6 (IRC-6) from CHAUVET®.
(IRC-6)
The following IRC-6 buttons are used with the Intimidator™ Wash 250 IRC:
· <BLACKOUT> - turns LED on/off
· <AUTO> - selects auto program mode
· <SOUND> - selects Sound-Active mode
· <STROBE> - strobing (0–20 Hz)
· <SPEED> - auto program speed
· <SENSITIVITY> - selects sound sensitivity
· <%> - dimmer
· <MANUAL> - white LED manual control
· <FADE/SNAP> - color change
· <R> - red LED manual control
· <G> - green LED manual control
· <B> - blue LED manual control
· <+> - shutter/dimmer/sensitivity/pan speed/tilt speed and macro increase
· <-> - shutter/dimmer/sensitivity/pan speed/tilt speed and macro decrease
· <0> to <9> - pan/tilt macro movements
5