Connect Audio From Other Device; Use Your Sound Base; Adjust The Volume - Sanyo FWSA205E Manual De Propietario

4.2.4 Select the source Lights up
when you switch to your
connected source.
4.3 Connect audio
from other device
Play audio other devices through your
Sound Base.
Note
•
During play, do not plug out the audio cable.
Connect audio through a digital
optical cable(Not supplied).
INPUT
OPTICAL
Connect audio through analog
audio cables(Not supplied).
DVD PLAYER
INPUT
AUX
OPTICAL IN
AUX IN
Use a Coaxial (RCA) to Optical
Toslink Digital Audio Converter
(not included) for Sound Base
which has an optical input.
5 Use your
Sound Base
This section helps you use the Sound
Base to play audio from connected
devices.
Before you start
•
Make the necessary connections
described in the Quick Start Guide
and the User Manual.
•
Switch the Sound Base to the correct
source for other devices.

5.1 Adjust the volume

1
Press +/- (Volume) to increase or
decrease a volume level.
• To mute sound, press
remote control.
» When the mute on, the
POWER indicator on the front
panel of main unit blinks in red.
» When the mute off, the
POWER indicator stop blink
and light off.
• To restore the sound, press
again or press VOL +/-.
2
To increase or decrease volume,
press VOL +/- on remote control.
0
• When press VOL+, the indicators
on the front panel light up from
left to right.
• When press VOL-, the indicators
on the front panel light up form
right to left .
on
32
EN 9