THERMEx INTEGRO Instrucciones De Uso página 47

B 513052168222032016
EXTRACTION
Press and disengage the control button and turn on the light.
The motor is switched on by turning the button clockwise to level I, II or III. The motor is switched off by turning the button to 0.
RECIRCULATION
The hood can be used for recirculation. This is used in kitchens and in locations where there is no possibility for vent to the outside. The air is sucked
first through the grease filters and then through a filter with activated carbon which removes odours.
NOTE: Two recirculation filters must be used, and these are not included in the purchase of the hood. They can be bought as accessories. The product
number on a set of recirculation filters is 535.05.6200.9.
The recirculation filters are installed on the motor as follows:
1
Remove the filters from the hood.
2
Install the two recirculation filters by
turning them onto the flanges on the sides
of the motor.
THERMEX INTEGRO
3
Insert the steel filters in the hood.
47