brondell Swash SE600 Advanced Manual Del Usuario página 21

USING THE SWASH SE600 (cont.)
Auto Mode
Pressing the "Auto Mode" button will initiate a one-minute Rear Wash with the following
parameters preset:
• Seat Temperature set to Medium
• Nozzle Oscillation (Move) on
• Water Pressure set to Level 3
• Water Temperature set to Medium
After the wash cycle is over, Auto Mode will initiate a one-minute Warm Air Dry cycle on Level 2.
Note: All wash and dry settings are adjustable, while the Auto Mode wash cycle is running, to suit
your preferences
Eco Mode
In this mode the water in the tank and the seat temperature will be heated to 86°F when the
bidet is not in use. Once a person sits on the bidet the Swash will revert to the last seat and water
temperature settings used. To select this option press and release the "Eco Mode" button on the
Seat Control Panel to illuminate its indicator.
19