brondell Swash SE600 Advanced Manual Del Usuario página 18

OPERATING THE SWASH (cont.)
SE600 REMOTE CONTROL (cont.)
1. Rear Wash Button
Press once to initiate a two-minute rear wash.
2. Front Wash Button
Press once to initiate a two-minute front (feminine) wash.
3. Warm Air Dry Button
Press once to initiate a two-minute warm air dry cycle.
4. Stop Button
Press to stop all wash or dry functions currently operating.
5. Nozzle Position Buttons
Press the arrow up and arrow down buttons to adjust the nozzle position forward and backward
during a wash cycle.
6. Water Pressure and Dry Temperature Indicators
These lights indicate the Water Pressure setting during a wash cycle, and the dryer temperature
during a Dry cycle.
7. Water Pressure and Dry Temperature Buttons
Press the "+" and "–" buttons to increase and decrease the outgoing water pressure to one of
five settings. Pressing these buttons while the Warm Air Dryer is operating will adjust the drying
temperature. Settings will be saved for the next use.
8. Water Temperature Button
Press and release this button to adjust the outgoing water temperature to one of four settings
(LO: 93.2° F, MED: 98.6° F, HI: 104° F, and OFF). Settings will be saved for the next use.
9. Seat Temperature Button
Press and release the "Seat Temp" button to adjust the seat temperature to one of four settings
(LO: 95° F, MED: 100.4° F, HI: 104° F, and OFF). Settings will be saved for the next use.
10. Water Temperature and Seat Temperature Indicators
These lights indicate the water temperature setting while a wash cycle is active, and the seat
temperature setting during all other times.
11. Massage Button
Pressing this button while a wash is running enables the water to repeatedly increase and
decrease in pressure in a pulsating pattern. Press again to stop.
12. Auto Mode Button Press this button once to initiate a one minute rear wash cycle followed by a one minute dry
cycle. See Page 19 for more information.
13. Move Button
Press to initiate nozzle oscillation (repetitive forward and backward nozzle movement) during
either the Front or Rear Wash. Press again to stop the oscillation.
14. Deodorizer Button
Press this button to activate a one-minute Deodorizer cycle.
15. Battery Life Indicator
This indicator will light up when the batteries are low. See Page 13 on how to replace the
batteries.
16