Astralpool 42350 Smart+ 60 Manual De Instalación Y Mantenimiento página 20

5.5.4. SAFETY STOP CONFIGURATION OF THE DOSAGE PUMP (PUMP-STOP FUNCTION)
The integrated pH controller has a security system (PUMP-STOP FUNCTION) acting on the dosage pump which allows to avoid the following
situations:

Damages caused by the dry operation of pump (depleted pH-minus product).

Over-dosage of pH-minus product (damaged or aged sensor).

PH regulation problems due to high alkalinity in the water (newly filled pool, high carbonate levels).
When the PUMP-STOP FUNCTION is enabled (factory default), the system stops the dosage pump after a programmed time without having
reached the pH setpoint.
The PUMP-STOP FUNCTION is factory set to 60 minutes. To change this value, follow the next procedure.
Fig. 25b
Fig. 25c
18