when
- Clean the equipment with a damp cloth
with a few drops of washing-up liquid and
then dry.
- Do not use solvents, or products with an
acid or base pH such as bleach, or abrasive
w on
products, for cleaning the appliance.
- Do not let water or any other liquid get into
until
the air vents to avoid damage to the inner
parts of the appliance.
- Never submerge the appliance in water
or any other liquid or place it under running
w on
water.
- If the appliance is not in good condition
of cleanliness, its surface may degrade and
inexorably affect the duration of the appli-
w on
ance's useful life and could become unsafe
to use.
Supplies
(2)
- Always use original supplies, designed
on/
specifically for your appliance model.
ppli-
Specifications:
n/off
- Rated Voltage (V):
- Battery capacity (A·h):
ce if
- No load speed (rpm):
ance
- Max drilling torque (N.m):
- Maximum capacity in steel (mm):
- Maximum capacity in wood (mm):
- Maximum capacity in masonry (mm):
- Drill chuck capacity (mm):
- Keyless Chuck
and
- No. of torque settings
- Reversible / Electronic
ean-
- Charging time (hours):
- Weight (Kg:)
mains
- Sound Pressure level (LpA) =
DO
- Sound Power level (LwA) =
HER
- Vibration
- These supplies are available in specialist
shops.
Anomalies and repair
- Take the appliance to an authorised tech-
nical support service if product is damaged
or other problems arise. Do not attempt to
disassemble or repair the appliance your-
self as this may be dangerous.
- If the connection to the mains has been
damaged, it must be replaced, take the ap-
pliance to an authorised technical support
service. Do not attempt to disassemble or
repair the appliance by yourself in order to
avoid a hazard.
VNPLI14M-2
14.4
1.5
0-400/0-1500
28
10
25
8
1-10
Yes
21+2
yes
1
1,25
84.4B(A), KpA = 3dB (LpA)
95.4dB(A), KWA = 3dB (LwA)
6,445 m/s2, K=1,5 m/s2
VNPLI18M-2
18
1.5
0-400/0-1500
30
10
25
8
1-10
yes
21+2
yes
1
1,35
= 84.7B(A), KpA = 3dB
= 95.7dB(A), KWA = 3dB
9,138 m/s2, K=1,5 m/s2
9