Declaration Of Conformity; Introducción - Skil 2702 Manual Original

HIGH POWER
- high torque
- for screwdriving and drilling large diameters
- for tapping thread
HIGH SPEED
- lower torque
- for drilling small diameters
• Battery level indicator $
Shows how much energy the battery has left
• Holding and guiding the tool
- keep ventilation slots H 2 uncovered
- do not apply too much pressure on the tool; let the
tool do the work for you
APPLICATION ADVICE
• When drilling ferrous metals
- pre-drill a smaller hole, when a large hole is required
- lubricate drill bit occasionally with oil
• When turning in a screw at/near the cross cut end or an
edge of wood, pre-drill a hole in order to avoid cracking
of the wood
• For an optimal use of the tool a steady pressure on the
screw is required, especially while removing
• When screwdriving in hard wood one should pre-drill a
hole
• Vibration level
The vibration emission level stated at the back of this
instruction manual has been measured in accordance
with a standardised test given in EN 60745; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration when
using the tool for the applications mentioned
- using the tool for different applications, or with
different or poorly maintainted accessories, may
significantly increase the exposure level
- the times when the tool is switched off or when it is
running but not actually doing the job, may
significantly reduce the exposure level
! protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
MAINTENANCE / SERVICE
• Keep tool and charger clean
- clean charging contacts in charger with alcohol or
contact cleaner
! unplug charger from power source before
cleaning
• If the tool/charger should fail despite the care taken in
manufacturing and testing procedures, repair should be
carried out by an after-sales service centre for SKIL
power tools
- send the tool or charger undismantled together with
proof of purchase to your dealer or the nearest SKIL
service station (addresses as well as the service
diagram of the tool are listed on www.skil.com.br)
SKIL_IB2702_BR_v2.indd 8
ENVIRONMENT
• In case of discard of that product don't throw in the
common garbage, conduce it for accredited
technical support Skil that will give the appropriate
destiny, following criteria of no aggression to the
environment, recycling the parts and accomplishing
the effective local legislation 7

DECLARATION OF CONFORMITY

• We declare under our sole responsibility that this
product is in conformity with the following standardized
documents: IEC 60745-1 and IEC 60745-2-1
Robert Bosch Ltda.
www.skil.com.br
NOISE/VIBRATION
• Measured in accordance with EN 60 745, the sound
pressure level of this tool is 72 dB(A) (standard
deviation: 3 dB), and the vibration < 2.5 m/s² (hand-arm
method; uncertainty K = 1.5 m/s²)
E
Taladradora/
atornilladora sin cable
INTRODUCCIÓN
• Esta herramienta ha sido proyectada para taladrar en
madera, metal, cerámica y materiales sintéticos; las
herramientas con control electrónico de la velocidad y
de giro a derecha e izquierda son también adecuadas
para atornillar y tallar roscas
• Lea y conserve este manual de instrucciones 3
CARACTERISTICAS TECNICAS 1
ELEMENTOS DE LA HERRAMIENTA 2
A Interruptor para encendido/apagado y control de
velocidad
B Luz (cargador)
C Anillo para regulación del par de apriete
D Posición de bloqueo (embrague)
E Selector de velocidad
F Interruptor para invertir la dirección de giro
G Portabrocas sin llave
H Ranuras de ventilación
J Cargador
8
2702
29-07-2010 14:31:44