Abus HomeTec Pro CFT3000 Instrucciones De Montaje página 9

General settings
cancel/ confirm/
exit
select
• When inserting the batteries, the ABUS logo appears for approx. 5 seconds; thereafter the
code field
• When waking the keyboard by knocking (5.2), the code field opens
• An acoustic feedback is given with each keyboard entry. Note: Signal can be turned off (5.3j).
• For the entry of a code number an
• Multiple incorrect code entries result in a temporary blocked entry status
• After approx. 120 seconds without entry, the system changes back to the code entry status
• Low/empty battery for drive and keyboard shown on the display as warning
• As soon as "Automatic Locking" is enabled, the keyboard queries the status of the drive
in a pre-determined period (approx. every 15 minutes). If a door is reported as unlocked
in this time, it is automatically locked again.
Entry of the Admin Code is
mandatory here!
ADMIN CODE:
12345
16
HomeTec_Pro_Tastatur_A6_160405_04.indd 16-17
0 9
-
Navigation Digits
is created on the display, i.e. 5 (-10) digits
• To teach the keyboard correctly menu
a-e is required
• Optional configuration options offer
the menu f-j.
a. MENU LANGUAGE
Deutsch, English, Italiano, Espanol, Français, Nederlands
cancel confirm
b. MENU CALENDAR
Time Format [hh:mm], - .
0 9
Date Format [dd:mm:yyyy], - .
0 9
Day
Monday, Tuesday, ..., Sunday
cancel confirm
c. MENU ADMIN CODE
Changing the admin code is required! The admin code is used only to configure the keyboard.
To operate it is necessary to create a user (MENU e).
Enter previous code: 0 - 9
Enter new code: - (Note: 5-10 digits.)
0 9
Re-enter code: -
0 9
Successful change is displayed. In case of an error message, rectify the relevant error.
confirm, to return to the main menu.
d. MENU TEACH IN
Note: The drive must be in teach-in mode. See CFA3000 instructions.
Door 3. Note: if you are using multiple drives on different doors, select the required drive
and send the login code from the keyboard to the drive.
confirmation OK? Again
cancel confirm
e. MENU USER
User 1, User 2, ... User 32.
User active, User not active, User not applied
Note: to create a new user, select the user marked with
Name: User Note: name is freely selectable, scroll through the alphabet with
See: INFO. Continue to the next character with
5.
Save the name with 3 seconds
CODE: Note: 5-10-digits, 0 - 9
DOOR: 1 Note: if you are using multiple drives, select door here.
1 assignment of first time zone.
2 assignment of second time zone
Note: you can restrict the user's access time, otherwise the user has
unrestricted access. To set up the time zone see MENU h.
Press ACTIVE to activate the user. Only active users can use the
keyboard! You can also set an active user to inactive (settings
confirm
Door 1, Door 2,
Sending login code. Door drive
and
.
.
. Cancel with .
, re-enter code!
05.04.16 17:22
17