Preparation Of The Pool And Cleaner; Overview; Packaged Components; Cleaner Features - Pentair PROWLER 920 Guia De Instalacion

2

PREPARATION OF THE POOL AND CLEANER

Overview

Prowler™ 920 robotic pool cleaner is designed to scrub, vacuum, and filter (including the waterline) your inground
pool. Before operating this product, be sure to read and follow all warning and safety instructions on pages iii-iv.

Packaged Components:

• Cleaner and 18m communication cable
• Power supply
• Additional pleated basket screens (Qty. 2)
(not shown)

Initial Setup

Before using the cleaner for the first time, complete the following steps:
STEP 1:
Power Supply Placement
Position the power supply at least 3.5 m from the edge
of the pool. See Figure 1.
Figure 1
STEP 2:
Unroll Communication Cable
Unroll the cable and stretch it out completely so that is
has no kinks. See Figure 2.
PROWLER™ 920 Robotic Inground Pool Cleaner Installation and User' s Guide

Cleaner Features:

• Weekly scheduling
• Floor and wall scrubbing
• Top loading basket filtration
• Multiple filtration options - Pleated or mesh
basket panels
Figure 2
STEP 3:
Connect Power Supply to Cleaner
Connect the communication cable to the power supply.
Ensure the connector notch is lined up with the
corresponding groove in the socket on the power supply.
Turn the cable connector clockwise to lock the cable
into the power supply connection. See Figure 3.
Figure 3