Grillo G85-D Manual De Instrucciones página 18

Translation of the Original Instructions
ADJUSTABLE WHEELS SPACER
These innovative screw spacers are advisable above all for ploughing.
If you have to change the track gauge, please unlock the two keys kept by the springs, start the
machine, put the first gear, block the differential lock and release the clutch when the engine is at
minimum; in this way the track gauge is automatically changed.
Attention not to unscrew them completely. Position the keys and respective springs again.
Now you can change the track gauge, lifting the machine and operating manually (fig.25).
BACK-CUTTER FURROWER
This tool is mounted at the rear of the tiller and works in tandem with it. The furrower is designed to
produce irrigation and seed drills (fig. 26).
TILTING FRONT BLADE - 125 cm
This highly resistant device is ideal for removing snow and levelling mounds of soil or gravel. May
be tilted to the right and left (fig. 27).
PIVOTING BRUSH – 100 cm
This brush (fig. 28) can be attached to the machine following the mower bar's instructions. It is very
useful to clean roads and squares. It can also be used to clean up 10-12 cm high fresh snow and it
can be steered left or right to make drifts.
17