Voltage Commutation; Operation - Unold Go Manual De Instrucciones

Caution! The appliance is very hot during and after

operation!

Never open the housing of the appliance. There is
danger of electric shock.
For safety reasons never use the appliance close to or
in a bathtub or washbasin or any other container filled
with water. If the hair dryer is used in a bathroom,
unplug it from the wall socket after use, since nearby
water presents a danger even when the hair dryer is
switched off.
The manufacturer will not be liable in the event of incorrect assembly, improper or
incorrect use or if repairs are carried out by unauthorized third parties.

VOLTAGE COMMUTATION

Before connecting the appliance please check if the volt-
age selector is adjusted to the right voltage (110–120/220–
240 V~). To change the selection a coin may be used.
OPERATION
1. Remove all packaging materials and transport safeguards.
Due to danger of suffocation, keep children away from the
packaging materials.
2. After washing your hair, dry off hair well with a towel.
3. Using the switch installed on one side, the appliance can
be switched from 110–120 V~ to 220–240 V~. Before
connecting the appliance, please check the local voltage
and adjust the appliance to the right voltage using a coin
or something similar.
4. Plug the plug of the appliance into an electrical outlet.
5. Switch on the appliance and select the desired level. The
following settings are available:
0 = OFF
1 = Gentle air flow, ideal for styling hair
2 = Moderate air flow, for drying and styling hair
Concentrator nozzle
With the concentrator nozzle you can dry specific parts
of your hair.
Copyright UNOLD AG | www.unold.de
15