Cleaning And Maintenance - Joycare BRIO JC-1200 Manual De Instrucciones

GB
Note: Length of safety belt can be properly adjusted as per height requirement of child.
ITEM MAINTENANCE: protecting it against the weather: water, rain or snow; continued and prolonged
exposure to sunlight could cause colour changes in many materials, keep this article in a dry place.
CLEANING THE FRAME: periodically clean the plastic parts with a damp cloth without using solvents or
other similar products; keep all metal parts dry to prevent rust; keep all moving parts clean (regulatory
mechanisms, the fitting parts, wheels ... ) from dirt and sand and if necessary, lubricate them with light oil.
CLEANING THE FABRIC PARTS: brush the fabric parts to remove dust and wash it by hand at a maximum
temperature of 30°; do not wring dry; do not use bleach; do not iron; do not dry clean; do not remove
stains with solvents and do not tumble dry.
Wash by hand in cold water
Do not tumble dry
Do not dry clean
Do not iron
Do not bleach
All the instructions and drawings are based on the latest information available at the time of going to print
and may be subject to change.
10
8 - Fold: Fold canopy, grip fold pull handle, lift upward, tread double
lock pedal, then hold onto handlebar with hands, press forward and
downward, thus, the stroller can be folded and finally buckle the fold
hook and lock tightly. (Fig. 8)
Safety plug
9 - Use of safety belt:
Unbuckle: press safety buckle plug inward.
Buckle: insert safety buckle plug into safety
receptacle till it is clicked to be buckled up. (Fig. 9)
Top ring band

CLEANING AND MAINTENANCE