Dometic COOLMATIC CRX50 Pro Instrucciones De Montaje Y De Uso página 17

CRX50 Pro, CRX65 Pro
Key for fig. 4, page 5
No. Explanation
1 Exhaust air
2 Cold intake air
3 Condenser
Observe the following installation dimensions:
Model
CRX50 Pro
CRX65 Pro
• Keep objects clear of openings in the housing or installation structure (such as
ventilation slots, etc.).
• Condensate is produced when the refrigerator is operating normally. You can
either wipe up the condensate on the floor of the refrigerator in regular intervals,
or drain it through a water drain outlet in the floor of the refrigerator (see chapter
"Mounting the water drain outlet (optional)" on page 17).
7.2 Mounting the water drain outlet (optional)
➤ Connect a hose with an inside diameter of 10 mm (0.4 inch) (not included) to the
water drain outlet.
➤ Lay the refrigerator on its side in order to access the bottom side.
➤ Mount the water drain outlet (fig. 5 2, page 6) aligned to the front or to the
back according to the desired direction.
➤ Remove the water drain plug (fig. 5 1, page 6) inside the refrigerator.
7.3 Installing the refrigerator
Proceed as follows to install the refrigerator:
➤ If you wish to drain the condensate through a hose:
Mount the water drain port (see chapter "Mounting the water drain outlet
(optional)" on page 17)
➤ Open the refrigerator door.
➤ Remove the blanking plugs (fig. 6 2, page 6).
EN
Dimensions W x H x D (mm)
390 x 541 x 556
458 x 531 x 571
Installing and connecting the refrigerator
Dimensions W x H x D (inch)
15.4 x 21.3 x 21.9
18.0 x 20.9 x 22.5
17