Using The Product As Intended; Safety Notes; Important Notes; Contents - marklin DHG 500 Serie Manual De Instrucciones

Ocultar thumbs Ver también para DHG 500 Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16

1. Using the Product as Intended

This model is to be used only with an operating system
designed for it (Märklin AC, Märklin Delta, Märklin Digital or
Märklin Systems).

2. Safety Notes

Make sure you read the following safety notes before using
this Märklin product for the first time.
• Use only switched mode power supply units and transfor-
mers that are designed for your local power system.
• This model may be supplied with power only from an
appropriate power source. (example: DC 18V / max. 36VA).
• Pay close attention to the safety notes in the
instructions for your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the model is to
be run in conventional operation. The 74046 interference
suppression set is to be used for this purpose.
• WARNING! Not suitable for children under 3 years. Sharp
edges and points required for operation. Danger of choking
due to detachable small parts that may be swallowed.
• Do not expose the model to direct sunlight, extreme
changes in temperature, or high humidity.
• The LEDs in this item correspond to Laser Class 1 accor-
ding to Standard EN 60825-1.

2.1 Important Notes

• The operating instructions and the packaging are a
component part of the product and must therefore be kept
as well as transferred along with the product to others.
• Maintenance, servicing, and repairs may only be done by
adults.
• Please see your authorized Märklin dealer for repairs or
spare parts.
• The warranty card included with this product specifies
the warranty conditions.

3. Contents

1 x Locomotive
1 x Set of instructions for use
1 x Warranty card

4. Functions

• Recognition of the mode of operation: automatic.
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: MHI 500
• Address set at the factory: 72
• Setting the locomotive parameters (address, accele-
ration/braking delay (ABV), maximum speed): with the
Control Unit, Mobile Station, Central Station.
• Headlights, changing over with the direction of travel.
• Only the train control functions and headlight changeover
feature are available in analog operation.
• Various controllable functions.
Märklin Start up can be added to and expanded with Märklin
H0 or Märklin Digital. See your authorized Märklin dealer for
advice.
7
Tabla de contenido
loading

Este manual también es adecuado para:

36504

Tabla de contenido