Pujol junior D Pro FC Instrucciones De Instalación Y Reglaje página 14

Selecting the Options
1 Auto closing
ON: Once opened, the door closes completely and
automatically, after the time set by the potentiome-
ter Aut.Clos.Timer
OFF: Automatic closing not activated
2 Pre-flash
ON: Before starting the operation of opening or
closing, the flashing light is activated (1.5 sec during
opening, 3 sec during closing)
OFF: Flashing light not activated
3 Wireless programming
ON: Wireless programming of new transmitters
allowed
OFF: Wireless programming not allowed
4 Deadman
ON: Deadman function
OFF: Automatic function. The door closes with the
Safety input configuration. These 4 switches eliminate the bridge between terminals
1 Sec Close
ON The safety input is not used (terminals 17 and 18
closed)
OFF NC contact is used in the safety input (17 and
18)
2 Stop
ON The stop input is not used (terminals 12 and 14
closed)
OFF NC contact in the stop input is used (terminals
12 and 14)
3 Sec 1
ON The input is not used as a contact / closing
safety sensitive edge, neither as a push button nor
as Deadman closing mode (bridging of the terminals
junior D Pro
alternative push button
5 Sec. 1 Close/Edge
ON: The input Sec.1 Close / Edge functions as a safety
sensitive edge (82Kohmios) when closing
OFF: The input Sec.1 Close / Edge functions as an
active photocell when closing
6 Photocells Test
ON: Photocells test not enabled
OFF: Photocells test enabled
7 Channel 2 / Garage Light
ON: The contact between the output terminals 8 and
9 is activated by pressing the button on the stored
channel + 1.
OFF: The output contact between terminals 8 and 9
operates the light of the garage
8 Permanent Light / Blinking
ON: The output of the blinking light (terminals 6 and
7) is activated intermittently
16 and 18).
OFF You use a NC contact / closing safety sensitive
edge in the entrance security as a push button or a
NO contact Deadman closing mode (terminals 16
and 18)
4 Sec 2
ON the contact input / safety sensitive edge opening
(bridging of terminals 12 and 13) is not used
OFF NC contact in the safety opening input is used
(terminals 12 and 13).
automatismos pujol 14
english
https://appceso.com