Tribest SEDONA COMBO SD-P9150 Manual De Instrucciones página 12

• The Sedona Combo has a Continuous Operation function which allows you to continuously
dehydrate for more than 99 hours. To enable this function, press and hold the 10 up button
until CO is displayed.
• The CO function will dehydrate for a maximum of 150 hours.
• The default setting for Fast Mode: 68°C (155°F) for 1 hour.
• The default setting for Raw Mode: 47°C (117°F) for 10 hours.
• The Sedona Combo will save your settings for next use even when you turn off the dehydrator.
6. UP/DOWN (10,1) buttons are for setting the temperature or the hours for the timer- one short
press will change the number by 10 or 1, and when the button is pressed for more than 1
second the number will continuously change.
7. TRAY button is used to select which compartment will be activated, which is indicated by the
lights to the right of the TRAY button.
• When the top light is lit GREEN, the upper compartment is activated.
• When the bottom light is lit GREEN, the lower compartment is activated.
• When both tray lights are lit, this indicates both upper and lower compartments are
activated for dehydrating. You can choose to dehydrate up to 9 trays of foods by selecting
both compartments or up to 4 trays of food in either the upper half or the lower half of the
unit in order to conserve energy when dehydrating smaller quantities of food.
1) Insert the Closed Tray in the middle slot (just above the white indicators on both right and left
sides, where the trays slide in and out) to divide the Sedona Combo into two 4-tray dehydrating
chambers.
2) Press the TRAY button to select which fan with heating coil will be active.
3) Load the trays into the chosen half of Sedona according to which fan with heating mechanism
is selected.
NOTE:
• The default setting of Sedona is whole (upper half + lower half).
• Since the Sedona Combo is equipped with two independent fans with heating mechanisms,
the Sedona Combo can be used to dehydrate food in the upper or lower half of the unit when
divided.
• The Sedona Combo will not remember your tray setting, and it will go back to whole when you
turn the Sedona Combo off.
• We recommend using the upper half only when drying up to 4 trays.
8. MODE button allows you to choose one of three settings. The lights to the right of the MODE
button indicate which mode is activated.
• When the top RED light is lit, only FAST mode is activated.
• When the bottom GREEN light is lit, only RAW mode is activated.
• When both the top RED and bottom GREEN light are lit, the Two-Stage Sequential Temperature-
Timer is activated (both FAST and RAW mode are activated).
The three settings:
1) FAST mode: The average internal temperature levels will be maintained at the indicated
temperature. As the heating element cycles on and off, internal temperature will rise and fall.
The indicated temperature is the average temperature maintained by the Sedona Combo. (See
chart on page 13).
2) RAW mode: Internal temperature will never go above the indicated temperature. Indicated
temperature is not the average temperature, indicated temperature is the maximum
temperature that the machine will go up to. This is useful for preserving certain vital nutrients
that can degrade at high temperatures. (See chart on page 13).
12