Tabla de contenido
Idiomas disponibles
Idiomas disponibles
13
ELECTRICAL INSTALLATION WITH CONNECTION
GROUNDING INSTRUCTIONS This appliance must
be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing
an escape wire for the electric current. This appliance
is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an outlet
that is properly installed and grounded.
WARNING - Improper grounding can result in a risk of
electric shock.
Consult a qualified electrician if the grounding instructions
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
15
Do not use an extension cord. If the power supply cord
is too short, have a qualified electrician install an outlet
near the appliance.
ELECTRICAL INSTALLATION WITH
OPTIONAL WIRING BOX
For Permanent wiring Installation-Use only
with Listed rangehood Wiring Box kit
sku # WIREBOX, manufactured by Faber.
10
14
For Non-Ducted Recirculation
Attach each
charcoal
filter to the
black grid on
each side of
the blower.
Press the
charcoal
1
filter tightly
to the black
grid on the blower side and rotate the filter
clockwise (towards the front of the hood) until
it locks into place. Turn counterclockwise
(towards the back of the hood) to remove.
Required Activated Charcoal Filter Accessory
- sku # - FILTER1
Long Lasting Activated Charcoal Filter
Accessory - sku # FILTER1LL
(purchased separately)
CABLE
7.3
12a
12e
2.1
2
2.2
Option
1
2
11
7.2.1
12c
Direct Connect Wiring Box
Accessory sku # WIREBOX
12c
(purchased separately)
15
12c
12a 11
10
7.1
12d
Replace the grease filters removed
previously.
7.3
12a
15
2.1
2
2.2
1
Max. 33
"
7/16
11
12e
7.2.1
12c
12c
12c
12a 11
7.1
12d
11
Tabla de contenido
