Troubleshooting: Problem - Brentwood Appliances JC-500 Instrucciones De Operación Y Seguridad

water. If the pulp has dried in pulp container or strainer let it soak in water
for approximately 10 minutes before cleaning.
NOTE: Some plastic parts might stain when it comes in contact
3. Dry all parts thoroughly before reassembling your Power Juicer.
4. Motor base can be cleaned with a damp cloth. Dry and store.
Troubleshooting:
Problem:
Juice Extractor will not work in the "I"
position
Motor makes a loud noise and unit
vibrates
Motor stalls when juicing / Pulp build on
Stainless Steel Strainer
Reduced Juice extraction/Juice leaks
between Rim of Juicer and Cover
Possible Solution:
*Safety Locking Bar was not positioned
properly.
*Turn the appliance off and unplug the
unit. Ensure all parts were assembled
correctly.
*Make sure all parts were cleaned
correctly and thoroughly.
*Turn off and unplug the appliance.
Ensure all parts were assembled
correctly.
*Juicing overripe fruits may produce
excessive pulp and clog the filter.
If pulp starts building under the lid, slow
down the juicing process. Turn off and
unplug appliance, clean the strainer
thoroughly.
Try a slower juicing action when using the
Pusher.
6