Brentwood Appliances JC-500 Instrucciones De Operación Y Seguridad página 5

3. Assemble as pictured. 1
Strainer/Blades and turn into place 4
th
Receptacle 5
under Spout 7
Chute
4. Make sure the appliance is in the OFF position ("O") before plugging the
power cable into electric outlet.
Using Your Power Juicer:
1. Connect your Citrus Juicer to the nearest electrical outlet.
2. Prepare your fruits or vegetables by washing them thoroughly and removing
hard skins that impede the Juicing process (i.e. oranges).
3. Your Power Juicer features an extra wide chute, most fruits and vegetables
will fit. Cut any fruits or vegetables that do not fit in the chute. Remove Pits
from fruits like Peaches, Mangos, as they can damage the unit.
4. You may add a bag to the Pulp Container to make cleaning easy. Lift the
Locking bar in place.
5. Turn the Power Juicer on and place the fruits and vegetables in the Chute.
Use the Pusher to slowly push them through the Stainless Steel Blades and
Strainer. It is important to do this slowly to extract the maximum juice from
your fruits or vegetables.
CAUTION: Do not insert Bananas or avocados as they do not produce juice
and will clog your Power Juicer. You can blend these in a Blender and later
add them to your juice.
6. Your Power Juicer will separate the Juice from the Pulp while operating.
7. To empty Pulp Container or Juice Container, turn the appliance to the "O"
OFF position before removing containers. Make sure to place both
containers back before continuing to Juice.
WARNING: Never use hands or Fingers to push food down in the Chute.
ALWAYS use the Food Pusher.
8. Once done unplug the appliance from the electrical outlet.
9. The detachable Juice Container makes storing and serving your fresh juice
very easy.
Cleaning Your Power Juicer:
WARNING: Always unplug the product and allow it to cool before cleaning or
storing it.
NEVER SUBMERGE THE BASE IN WATER OR ANY OTHER LIQUID
NOTICE: The Pusher, Chute, Pulp Guard, Pulp Container, Strainer/Blades,
and Receptacle can be washed in dishwasher or under running water.
1. Always unplug the product from the electrical outlet when it is not in use or
will be left unattended and before cleaning.
2. The Pusher, Chute, Pulp Guard, Pulp Container, Strainer/Blades, and
Receptacle can be washed using a nonabrasive sponge and soapy warm
st
) Motor Base 2
) cover with Chute and Pulp Guard 6
th
) Lock Bar onto Pulp Guard Lid 8
nd
) Add Receptacle 3
th
) Add Pulp Container under
th
) place Juice Container
th
) Insert Pusher above
5
rd
) Insert