Maintenance Schedule - Husqvarna 536LiHE3 Manual De Instrucciones

Maintenance schedule

WARNING! Always disconnect the
!
battery before any maintenace on the
machine.
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the
Maintenance section.
Maintenance
Clean the outside of the machine.
Check that the start and stop switch works correctly and is not
damaged.
Make sure that the power trigger and the power trigger lockout
function correctly from a safety point of view.
Check that all controls are undamaged and in working order.
Check that the cutter and cutter guard are not damaged or
cracked. Replace the cutter or cutter guard if they have been
exposed to impact or if they are cracked.
Replace the cutting unit if it is damaged.
Check that the hand guard is not damaged. Replace the guard if
damaged.
Check that nuts and screws are tight.
Check that the battery is intact.
Check the battery's charge.
Check that the battery charger is intact and functional.
Ensure the cutting unit position lock is in working order.
Check that the screws that hold the blades together are correctly
tightened.
Check the connections between the battery and the machine and
also check the connection between battery and the battery
charger.
20 – English
MAINTENANCE
Before use
Weekly
maintenance
After each time the machine is used
X
X
X
X
X
X
X
X
X
X
X
X
Monthly
maintenance
X