Tabla de contenido
¾"
¾"
Installation Suggestions
2
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• Please read over these instructions thoroughly be-
fore beginning installation. Make sure that you
have all tools and supplies needed to complete
the installation.
• To prevent scald injury, the maximum output tem-
perature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum out-
put temperature can be no higher than 112° F.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
This showerhead is for use with automatic
compensating valves rated at 1.1 GPM (4.2 l/min)
or less.
Tools Required / Outiles Utiles /
Herramientas Útiles
8 mm
15 - 75 psi
145 psi
120° - 140° F*
176°F*
1.2 gpm
Tabla de contenido
