Chauvet DJ COREpar UV USB Guía De Referencia Rápida página 5

COREpar™ UV USB QRG
Control Panel
Description
DMX Linking
Starting Address
Master/Slave
Connection
D-Fi™ USB
Connectivity
Button Function
<MENU> Exits from the current menu or function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases the
<DOWN>
numeric value when in a function
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
The COREpar™ UV USB can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 508.
The COREpar™ UV USB uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
The COREpar™ UV USB is able to become a D-Fi™ wireless
receiver/transmitter with the use of the D-Fi™ USB from CHAUVET® DJ.
Simply set the DIP switch D-Fi™ receiving/transmitting channel, plug it
into the USB port then set the product's DMX Personality and DMX
Address. Further instructions for connecting and configuring this product
for D-Fi™ USB operation are in the User Manual.
WARNING! DO NOT plug anything other than a D-Fi™ USB into the
USB port. Doing so may cause damage to the product.
Once plugged in, the D-Fi™ USB will take over the product. Wired
DMX and IRC-6 will be unavailable until you unplug the D-Fi™ USB.
The priority levels are:
1. D-Fi™ USB
2. Manual Digital Display/Menu Buttons
3. Wired DMX
4. IRC-6 Remote Control
5
EN