Mounting - Honeywell TrueZONE HZ322 Guía De Instalación Profesional

Installation Guide

MOuNTiNg

Mount the HZ322
TrueZONE panel near
1
the HVAC equipment;
locate it on a wall, stud,
roof truss, or cold-air
return.
NOTE: The HZ322
TrueZONE panel can be
mounted in any orienta-
tion; level it for appear-
ance only.
Separate the zone panel cover from the base, and use the base as a template to drill mounting holes.
2
Attach the base to the wall, stud, roof truss, or duct with appropriate screws (not included).
Fig. 3
69-207EFS—0
SPRD BYPASS DAMPER
REGISTRE DE DÉRIVATION SPRD
HUMIDIFICADOR DESVIADOR CON SPRD
DATS (ALTERNATE LOCATION)
CAPTEUR DATS (AUTRE
EMPLACEMENT POSSIBLE)
DATS (UBICACIÓN
ALTERNATIVA)
TrueZONE PANEL MOUNTED ON RETURN DUCT
TABLEAU DE RÉGULATION PAR
ZONES TrueZONE MONTÉ SUR LE
CONDUIT DE REPRISE D'AIRPANEL
DE ZONA TrueZONE MONTADO
EN UN CONDUCTO DE RETORNO
DATS (AT LEAST 3 FT FROM PLENUM)
CAPTEUR DATS (À AU MOINS
0,9 M [3 PI] DU PLÉNUM)
DATS (AL MENOS A 3 PIES
DE LA CÁMARA IMPELENTE)
Use two screws for attaching to a stud or roof truss, or
four screws for duct or drywall/plaster installations.
M28029
2
FURNACE OR AIR CONDITIONER
APPAREIL DE CHAUFFAGE OU DE CLIMATISATION
CALEFACCIÓN O AIRE ACONDICIONADO
Fig. 2
ZD SERIES ZONE DAMPERS
REGISTRES DE
ZONE SÉRIE ZD
HUMIDIFICADORES
DE ZONA ZD
SUPPLY DUCT
CONDUIT DE SOUFFLAGE
CONDUCTO DE
ABASTECIMIENTO
TrueZONE PANEL MOUNTED ON WALL
TABLEAU DE RÉGULATION
PAR ZONES TrueZONE
MONTÉ SUR LE MUR
PANEL DE ZONA TrueZONE
MONTADO EN LA PARED
MFS24921