ION PROJECTOR PA Guia De Inicio Rapido página 9

Operation
Selecting the Projector Source
With the Projector PA, you can project video from a device connected to the HDMI Port or
project an image, music, video, or text file from a USB drive plugged into the USB Port.
Note: To see what file formats Projector PA can read on a USB drive, see the Appendix.
To turn the projector on and off, press the Projector button while Projector PA is fully
powered on (not in standby mode).
To select the video source for the projector:
1. Press the Source button while the projector is turned on, and then a menu will appear on
the right side of the projector screen.
2. Press the Source button again to toggle between HDMI and USB Media Player.
Alternatively, use the Arrow buttons on the Navigation Pad to highlight the desired
option.
3. When the desired source is highlighted on the screen, press the OK button to confirm
your selection.
If USB Media Player is selected as the projector source, the top left of the screen will
indicate whether a USB drive is plugged in, and four icons will appear on the projection
screen: Photo, Music, Movie, and Text. This is the home screen when USB Media Player
is selected as the projector source. When viewing files on a USB drive, you can always
return to the home screen by pressing the Return button until you reach the home screen
again.
If HDMI is selected as the audio source, the projector will act as a live feed for the device
plugged into the HDMI Port.
See the following sections of this manual for more details on using Projector PA with a USB
drive or with a device connected to the HDMI Port.
To adjust the projector's picture settings or other settings, press the Menu button at any
time while the projector is turned on. Use the Arrow buttons on the Navigation Pad to scroll
through settings and press the OK button to select settings.
9