Fitting, Removing Spray Lance; Fitting, Removing High-Pressure Hose - Stihl RE 98 Manual De Instrucciones

English

Fitting, removing spray lance

Spray lance
2
Press the spray lance (1) into the
N
mount on the spray gun (2), turn it
by 90° so that it engages
Remove
Press the spray lance (1) into the
N
mount on the spray gun (2), turn it
by 90° and pull it out of the mount
Nozzle
4
Insert nozzle (3) in spray lance until
N
the safety latch (4) engages – at
which point the safety latch button
will spring out again – the adjustable
high-pressure nozzle has an anti-
twist device; orient this according to
the groove on the spray lance
38
Remove
Press the safety latch button (4) and
N
pull out the nozzle (3)
1
3
+
Fitting, removing high-
pressure hose
High-pressure hose on machine
Fit
2
1
Push high-pressure hose onto the
N
connector (2)
Attach union nut (1) and screw it on
N
and tighten by hand
Remove
Unscrew the union nut (1)
N
Pull high-pressure hose off of
N
connector (2)
RE 98