Power Supply (Adapter); Connecting The Power Adapter; Ac/Dc Adapter Information - Chauvin Arnoux C.A 1623 Manual De Instrucciones

English

6 POWER SUPPLY (ADAPTER)

6.1

CONNECTING THE POWER ADAPTER

1. Connect the AC power cord to the AC-DC converter.
2. Plug the AC power cord into an electrical outlet (100 V-240 V).
3. Plug the DC power plug of the converter into DC power socket of the meter.
DC power socket
6.2

AC/DC ADAPTER INFORMATION

Input: 100 V-240 V AC, 50-60 Hz 1.8 A
Output: DC 12 V
Polarity:
WARNING:
1. Please use the original AC power adapter, using other AC power adapter may
damage your instrument.
2. The AC power adapter can only be used indoors.
3. Please plug the AC power cord into an electrical outlet first and then firmly
insert DC plug into DC input end in the right of the meter. When unplugged,
firstly pull out the DC plug perpendicular to DC input end and then unplug the
AC plug from the electrical outlet.
4. Do not use the AC power adapter in other equipment except this instrument.
5. In use, it is a normal phenomenon that the AC power adapter will be hot.
6. Do not demolish the AC power adapter. Otherwise, it may be dangerous.
7. Do not use the AC power adapter in a high temperature or wet place.
8. Please make the AC power adapter avoid a strong bump.
9. It is normal when the AC power adapter make some noise in use.
C.A 1623 RTD probe temperature calibrator
DC power plug
2 A MAX
AC-DC converter.
19
AC power cord