Installation - THERMEx CENTRALVENTILATION VILLA II Instrucciones De Montaje

M 536991040901102019

INSTALLATION

Before installation of the cooker hood and the Centralventilation Villa II, the valve motor should be installed on the valve. This is carried out as
follows:
1
x1
Make measurements for mounting the valve
motor bracket onto the flange of the valve.
NOTE: Be especially careful to ensure that the
bracket is centered.
Start by installing the cooker hood in accordance with the installation instructions included with the cooker hood.
NOTE: When installing the Centralventilation Villa II, DO NOT install the none-return valve on the cooker hood even if this is delivered together
with the cooker hood. Instead, install the supplied motorised valve between the cooker hood and the central ventilation system.
2
x1
Mount the bracket of the valve motor onto the
flange of the valve using the self-tapping screw.
THERMEX CENTRALVENTILATION VILLA II
3
Install the valve motor by mounting it on the
valve shaft and then fastening the motor to the
bracket.
69