Stihl MS 261 Manual De Instrucciones página 47

4
Use circlip pliers to carefully remove
N
the circlip (1).
Remove the washer (2), carrier (3)
N
and spring housing (4).
All models
1
2
3
Use a screwdriver or suitable pliers
N
to remove the spring clip (1) from
the starter post.
Carefully remove the rope rotor with
N
washer (2) and pawls (3).
The rewind spring may pop out
and uncoil during this operation –
take care to reduce risk of injury.
MS 261, MS 261 C
Models with ElastoStart
3
2
1
Pry the cap out of the starter grip.
N
Remove the remaining rope from
N
the rotor and starter grip.
3
Thread the new rope through the
N
starter grip and tie a simple
overhand knot.
Pull the knot back into the grip.
N
Refit the cap in the grip.
N
Models with Easy2Start
Remove the remaining rope from
N
the rotor and starter grip.
Thread the new rope through the
N
starter grip and tie one of the knots
shown.
English
45