ARDES AR5D42PRW Folleto De Instrucciones página 14

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
Batteries
Remote control is supplied with battery inside (CR2025 type, 3V); remove the transparent
sheet from the battery cover before use remote control.
When the battery is over, it must be replaced with the same type.
To remove battery:
"Power" button (A)
When the device is switched off, press this button to turn it on.
When the device is switched on, press this button to turn it off.
Speed Button (B):
Press this button when unit is on to select the desired speed: 1, 2, 3.
The related indicator light of speed (X1) will turn on in the control panel.
Mode Button (C)
Press this button when unit is on to select the desired mode: normal, natural mode (the
indicator light X6 will turn on in the control panel) or sleeping mode (the indicator light X7
will turn on in the control panel).
Timer Button (D)
You can set the timer to switch the fan off automatically after the set time. Press this button
repeatedly to select the desired time period in half hours increments from 0,5 hours to 7,5
hours.
Each time you press the button, the time increases with 0,5 hours. The timer light indicators
are turned on, on the display (X1+X3+X4).
OSC Button (E) – (Remote control)
Press this button when unit is on to activate the automatic oscillation from left to right. To
deactivate the automatic oscillation press again this button.
VERTICAL SLOPE:
You can vertically point the front of the fan choosing the desired angle. It
is sufficient to move the front of the fan up or down according to the
desired slope.
(EN) MAINTENANCE
Before carrying out the regular cleaning operations turn off the fan and unplug it.
Ensure that the fan is switched off from the supply mains before removing the guard.
For external cleaning use a soft and dry cloth.
DO NOT dip the device in water, or splash it with any other liquids.
DO NOT use solvents or any other chemical products for cleaning it.
Reinstall the guard after cleaning and before connecting the plug tot he mains.
When you do not use it, after cleaning it, store the fan in a dry place.
14 / 56
Tabla de contenido
loading

Tabla de contenido