Idiomas disponibles
Idiomas disponibles
CLEANING AND CARE
CAUTION!
Cleaning the intake filters
1. Remove the intake filters.
1 Place fingers in grids on the front of the intake filters and lift up.
2 Hold the intake filters level and pull them out.
1
Intake filters
2. Cleaning
Cleaning the intake filter
Remove dust with a vacuum cleaner or by washing. After washing, be sure to allow it to dry thoroughly in a shady place
before reinstalling.
3. Replace the intake filter.
Hang the edge of the intake filter on the body. Using this as a support point, push forward to secure as shown in the
illustration.
En-5
G Before cleaning the unit, be sure to stop the unit and disconnect the power supply.
G Do not stand on an unstable platform when cleaning.
G When removing and replacing the air filters, be sure not to touch the heat exchanger, as per-
sonal injury may result.
G When cleaning the unit's body, do not use water hotter than 40 °C, harsh abrasive cleansers, or
volatile agents like benzene or thinner.
G If dirt is allowed to accumulate on the air filter, air flow will be reduced, lowering operating
efficiency and increasing noise.
During periods of normal use, the air filters should be cleaned every five weeks.
1
2
2
