Cleaning & Maintenance - BaByliss PRO Nano Titanium MiraCurl Steam Tech BABNTMC2 Manual Del Usuario

CLEANING & MAINTENANCE
it is very important that you use the cleaning tool included with your
iron to regularly clean the curl chamber. this will prevent a buildup
of product to ensure the curls produced are always perfectly formed.
• Ensure the appliance is switched off, unplugged and cool.
• Lightly dampen the cleaning tool with warm water and mild detergent or soap.
• Insert the tool fully into the curl chamber cavity as per the diagrams below.
• Rotate the tool around the curl chamber to remove any buildup of product.
• Ensure the appliance has dried thoroughly before re-using.
• The cleaning tool can be used numerous times; just remove the felt pads, rinse them
in warm, soapy water and let dry before using again.
When not in use, your appliance is easy to store. allow unit to cool, then simply put back
in the box, and store out of reach of children in safe, dry location. do not jerk or strain
cord at plug connections.
BABNTMC2 IB-126966.indd 11-12
STORAGE
NOTICE
this Product is equiPPed With an instant heat circuitry. state-oF-the-art
technology alloWs the heater to reach the oPerating temPerature in less
than one minute.
do not leave Product on or Plugged in While not in use. unit Will burn out
iF PoWer is KePt on For an extended Period oF time. Warranty Will be voided.
turn unit oFF and unPlug When not in use.
wARNING:
IF YOU ThINk ThE POwER IS
OFF whEN ThE SwITCh IS OFF,
YOU'RE wRONG.
KEEP AWAY FROM WATER
everyone knows that electricity and water are a dangerous
combination, but did you know that an electrical appliance is
still electrically live even if the switch is off? if the plug is in, the
power is on. so when you are not using your appliances, keep
them unplugged.
ALwAYS UNPLUG SMALL APPLIANCES.
7/29/14 9:33 AM