Chauvin Arnoux MiniFlex MA110 Manual De Instrucciones página 25

The MA110 is protected against voltages up to 600 V with respect to earth in measurement category
IV, or 1000 V in category III. The MA130 is protected against voltages up to 600 V with respect to earth
in measurement category III. The protection assured by the current sensor can be compromised if it is
used in a way that is not recommended by the manufacturer.
„ Comply with the rated maximum voltage and current and the measurement category.
„ Never exceed the protection limits stated in the specifications.
„ Comply with the conditions of use, that is to say temperature, humidity, altitude, degree of pollution
and location of use.
„ Do not use the instrument if it is open, damaged, or incorrectly reassembled. Before each use, check
the integrity of the insulation on the coil, the leads, and the electronic unit.
„ The application or withdrawal of the sensor on uninsulated conductors at dangerous voltages requires
the use of suitable safety equipment.
„ If it is not possible to power down the installation, follow safe operating procedures and use suitable
means of protection.
„ All troubleshooting and metrological checks must be done by competent, accredited personnel.
1. PRESENTATION .......................................26
1.1. General .........................................26
1.2. Single-phase MiniFlex
1.3. Three-phase MiniFlex
2. CURRENT MEASUREMENT ....................28
2.1. Measurement principle ..................28
2.2. Use ................................................28
2.3. Mains adapter (option) ...................32
3. CHARACTERISTICS ................................34
3.1. Reference conditions .....................34
3.2. Electrical characteristics ................34
3.3. Variations in the range of use ........35
3.4. Typical frequency response
curves ............................................36
3.5. Frequency limitation as a function
of amplitude ...................................38
3.6. Power supply .................................38
3.7. Environmental conditions ..............39
3.8. Construction specifications ............39
3.9. Conformity to international
standards .......................................40
3.10. Electromagnetic compatibility
(CEM) ...........................................40
PRECAUTIONS FOR USE
CONTENTS
..................26
®
.................27
®
4. MAINTENANCE ........................................41
4.1. Cleaning ........................................41
4.2. Replacing the batteries ..................41
5. WARRANTY ..............................................42
6. TO ORDER ................................................43
6.1. Accessories and spares .................43
6.2. Specific models .............................44
25