M 527230061212112015
WARNINGS
•
The range hood is designed and
manufactured according to DS/EN
60335-1.
•
This range hood is only for use in private
house holdings, if used for other
purposes the warranty will be repealed.
•
Installation must be performed by a
skilled electrician in accordance with the
specifications given by Thermex
Scandinavia A/S (Thermex) and
legislation in force.
•
Thermex disclaims all responsibility in
regards to damages caused by wrong
installation, mounting or use.
BEFORE MOUNTING/COMMISSIONING
•
Inspect the range hood for transport
damages, flaws and defects immedia-
tely after the receipt.
•
Transport damages must be filed to the
haulage contractor and Thermex
immediately after the receipt.
•
Flaws and defects must be filed to
Thermex within 8 days the receipt, and
not later than mounting/commissioning.
MOUNTING
•
The range hood is intended for working
at 230 Volt ±10%~ 50 HZ ±10% in
referring to EN 50160.
•
Connect the hood with the attached
plug. NOTE: The hood MUST have earth
if the plug has an earth connection.
•
For models with external motor applies
that NOT to use common zero by
installing the hood and engine, as this
will affect the control.
•
It MUST be ensured that the motor can
be used with the selected range hood
when using an external motor from
another supplier. Otherwise the
warranty no longer apply.
•
Do not plug in the range hood until the
mounting is complete.
•
The air must not be discharged from the
hood into a pipe used for extraction
from devices using gas or other fuels.
Such devices must have a separate vent.
•
The national legislation on air emissions
must be observed.
•
Always use the original dimension of the
vent. By reducing the dimension of the
vent, the performance will be reduced
and the sound level will be increased.
•
The vent to the open air, must be as
short as possible in order to get the
greatest possible capacity of the range
hood.
•
The number of bends on the vent ought
to be minimised, to gain the greatest
possible capacity of the range hood.
•
Thermex recommends to always use
sound and condensation insulated vent
hose at the carrying through in
unheated spaces.
•
Thermex recommends that there is used
for a muffler to minimize the noise level
when using flexible hose.
THERMEX VICHY 65