Mixing Gasoline And Oil - Maruyama BT230L Manual Del Propietario U Operador

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3.
Always shut off the engine before refueling.
Never remove the fuel tank cap while the engine
is running or just right after stopping the engine.
4.
Always open the fuel tank cap slowly to release
any possible overpressure inside the tank.
5.
Do not overfill the fuel tank. Stop filling 1/4-1/2
in. (6 mm-13 mm) from the top of the tank.
6.
Tighten the fuel tank cap carefully but firmly after
refilling.
7.
Wipe up any spilled fuel before starting the
engine.
8.
Move the unit at least 10 ft. (3 m) away from the
fueling location and fuel storage container before
starting the engine.
10 ft. (3 m) minimum
Recommended Oil Type
Only use a two-stroke engine oil formulated for use in
high-performance, air-cooled two-stroke engines.
MARUYAMA brand two-stroke oil is formulated for
use in high-performance, air-cooled two-stroke
engines.
IMPORTANT: Do not use National Marine
Manufacturer's Association (NMMA) or BIA
certified oils. This type of two-stroke engine oil
does not have the proper additives for
air-cooled, two-stroke engines and can cause
engine damage.
Do not use automotive motor oil. This type of oil
does not have the proper additives for air- cooled,
two-stroke engines and can cause engine
damage.
Recommended Fuel Type
Use clean, fresh lead-free gasoline, including oxygenated
or reformulated gasoline, with an octane rating of 89 or
higher. To ensure freshness, purchase only the quantity
of gasoline that can be used in 30 days. Use of lead-
free gasoline results in fewer combustion chamber
deposits and longer spark plug life. Use of premium
grade fuel is not necessary or recommended.
Use of Fuel Additives
IMPORTANT: NEVER USE ALCOHOL,
GASOHOL CONTAINING MORE THAN
10% ALCOHOL BECAUSE ENGINE FUEL
SYSTEM DAMAGE COULD RESULT.
DO NOT USE FUEL ADDITIVES OTHER
THAN THOSE MANUFACTURED FOR
FUEL STABILIZATION DURING STORAGE
SUCH AS MARUYAMA'S STABILIZER/
CONDITIONER OR A SIMILAR PRODUCT.
MARUYAMA'S STABILIZER/CONDITION-
ER IS A PETROLEUM DISTILLATE BASED
CONDITIONER/STABILIZER.
MARUYAMA DOES NOT RECOMMEND
STABILIZERS WITH AN ALCOHOL BASE
SUCH AS ETHANOL, METHANOL OR ISO-
PROPYL. ADDITIVES SHOULD NOT BE
USED TO TRY TO ENHANCE THE POWER
OR PERFORMANCE OF MACHINE.

Mixing Gasoline And Oil

IMPORTA NT: The eng i ne used on th is
Trimmer is of a two-stroke design. The internal
moving parts of the engine, i.e., crankshaft
bearings, piston pin bearings and piston to
cylinder wall contact surfaces, require oil
mixed with the gasoline for lubrication.
Failure to add oil to the gasoline or failure to
mix oil with the gasoline at the appropriate
ratio will cause major engine damage which
will void your warranty.
— US-13 —
Tabla de contenido
loading

Tabla de contenido