How To Start - Stop The Engine; Using The Machine - Stiga SEV 2416 Q Manual De Instrucciones

8 PREPARING TO WORK / HOW TO START - STOP THE ENGINE / USING THE MACHINE
EN
DANGER!
chine using a differential switch (RCD ­ Re-
sidual Current Device) with a tripping current
of max. 30 mA.
IMPORTANT
outages:
– make sure that the electric system's overall ca-
pacity is adequate;

6. HOW TO START - STOP THE ENGINE

STARTING THE ENGINE (Fig. 12)
Before starting the engine:
– Fasten the extension lead (1) to the cable clamp
on the rear handgrip.
– FIRST connect the power cable plug (2) to the
extension lead (3) and THEN plug the extension
lead into the mains socket (4).
– Take off the bar cover.
– Make sure the bar is not touching the ground or
any other object
To start the engine (Fig. 12):
1. Disengage the chain brake (5) by pulling the
front hand guard towards the front handgrip.
2. Hold the chain-saw firmly with both hands.
3. Press the safety button (6) and then the switch
(7).

7. USING THE MACHINE

WARNING!
that of others:
1) Do not use the machine without reading
the instructions carefully. Become ac-
quainted with the controls and the proper
use of the machine. Learn how to stop the
engine quickly.
2) Only use the machine for the purpose for
which it was designed, that is for "felling,
bucking and delimbing trees with dimensions
suitable for the length of the bar" or wooden
objects with the same characteristics.
Any other use, such as using accesso-
ries not specified in this manual, may be
hazardous and also damage the machine.
Examples of improper use may include,
Supply power to the ma-
To prevent power supply
For personal safety and
– connect the machine to a mains socket with suf-
ficient amperage;
– avoid simultaneous use of other electrical appli-
ances with high power consumption.
NOTE
switch, the safety button is also released and the
engine stops.
WARNING!
second to come to a stop after the engine is
switched off.
STOPPING THE ENGINE
To stop the engine:
– Release the switch (7).
– FIRST unplug the extension lead (3) from the
mains socket (4) and THEN disconnect the
power cable (2) of the machine from the exten-
sion lead (3).
but are not limited to:
– trimming hedges;
– intaglio carving;
– sectioning pallets, crates and various
packing materials;
– sectioning furniture or other materials
with nails, screws or other metal com-
ponents;
– butchering meat;
– using the machine to lift, move or split
objects;
– using the machine while fastened to
fixed supports.
3) Keep in mind that the operator or user is
re sponsible for accidents or hazards oc-
curring to other people or their property.
4) Always wear suitable clothing when us-
ing the machine. Your dealer can provide
When you release the
The chain may take one