Beper VE.115H Manual De Instrucciones página 10

Stand Fan Use instructions
PRODUCT AND ACCESSORIES Fig.A
1. Base
2. Telescopic tube
3. Control panel
4. Motor
5. Grid locking hooks
6. Blades
7. Front and back grid
8. Swing on/off button
9. Front disc
10. Adjust inclination knob
FAN ASSEMBLY Fig.B
1. Fix the tubes that make up the base so that they can get a cross.
2. Insert the telescopic tube into the base.
3. Fix the tube to the base with the screws.
Important: Firmly weld all base supports components to ensure good stability of the fan, otherwise it could oscil-
late dangerously.
4. Fix the engine body to the telescopic tube with the supplied screws.
5. Insert the back grid, making sure to match the holes with the pins.
6. Fix the back grid with the appropriate nut.
7. Insert the blades.
8. Fix the blades with the appropriate ring, turning counterclockwise.
9. Fix the front disc to the front grid.
10. Insert the front grid and fix it with the appropriate locking hooks and screw.
SPEED SELECTION
Choose the speed desired pressing on the buttons of the control panels.
Position 0 the fan switch off.
Position 1 low speed.
Position 2 medium speed.
Position 3 high speed.
HEAD INCLINATION
It is possible to choose various positions and change the air flow swing.
Before changing it, switch off the fan.
Take the motor body, unscrew the adjust inclination knob and change the inclination of the fan as desired and
screw the knob strongly.
Attention : do not try to force the inclination position in order to avoid any failure.
SWING
It is possible to activate or disconnect the swing of the fan, by touching appropriate button. Swing allow to provide
the air uniformly.
To activate the swing push the button down until completely blocked ; the head fan turns automatically from right
to left.
To disconnect the swing raise the button completely.
CLEANING
Before cleaning, switch off and unplug the fan.
For cleaning use a soft cloth, that may be softly wet.
Do not use alcohol or chemical substances, or any detergent that could damage this appliance.
Do not allow water or other liquids to penetrate in the fan, in order to protect it.
After cleaning, dry every parts before using the appliance.
During the winter and when not used, keep this appliance in a dry and clean place.
10