Use; Gas Leaks; Safety Tips 2 - Qlima GH 1142 R Instrucciones De Uso

into liquid. With LPG (= propane/butane mixture), it will often help to give the gas cylinder a shake.
Use only a correct low pressure regulator. Outlet pressure details: see rating label. Do not move the appliance when operating, shocks and
bumps may activate the safety device. Do not twist the flexible tubing or hose.

USE

The knobs for turning the gas heater ON are located on the upper part of the heater:
• Open the gas container (follow the user instructions provided with the low-pressure regulator).
• Turn the regulation knob into position 1 as indicated in fig. Press it all the way down and, at the same time, press the piezoelectric button;
this turns the atmosphere analyzer on. To keep the flame lit, the knob must be held pressed down for 20 - 40 seconds after ignition.
1. Minimum and Ignition
2. Medium
3. Maximum
4. Piezoelectric ignition
Release the knob and turn it to the position corresponding with the desired amount of heat:
• To turn OFF the device, close the gas container valve.(follow the instructions provided with the low-pressure regulator).
• Do not hold the regulation knob pressed down for longer than 40 seconds.
• Never move the heater when it is hot and/or in operation.

GAS LEAKS

If you think there may be a gas leak, please follow this procedure:
• Close the gas container valve. (follow the user instructions for the regulator);
• Extinguish all open flames, for instance stoves;
• Open windows in order to increase airflow circulation;
• Turn off electrical devices, for instance lamps;
• Prepare a bucket of soapy water;
• Open the gas container (follow the user instructions for the regulator);
• Brush the soapy water on all fittings and connections of the gas circuit;
• If there is a gas leak, bubbles will rise up from the location of the leak;
• If a leak is found, close the gas container (follow the user instructions for the regulator).
• Tighten the fitting and the metal rings of the connection;
• Open the gas container (follow the user instructions for the regulator) and repeat the procedure again.
If there is still a gas leak contact a professional and qualified engineer for help.

SAFETY TIPS 2

• Always place the heater facing the center of the room.
• Do never move the heater when it is burning.
• Prevent people, especially young children and elderly people from touching very hot surfaces.
• Never dry clothes at the top of the metal guard grill
• Keep all flammable materials at least one meter away from the heater.
• Never use a gas heater in a bathroom, bedroom. mobile home, high rise buildings or caravan. Toxic gases may cause serious health problems
in these situations.
• Never use or store solvents and pressure pack cans near a gas heater, even if the heater is turned off.
• Never dispose of rubbish such as cigarette butts in a gas fire -this can affect combustion and produce dangerous pollutants.
• Make sure rooms containing gas heater are well ventilated.
• Keep areas around the heater free of papers, trash, and any other combustible items
• Place the heater on a level, hard, nonflammable surface; do not place on rugs, carpets or socket, near bedding or drapes, or on tables or
countertops.
• Turn the heater off if you leave the area, and never leave a heater on while sleeping or if you leave home.
• Always use specified or standard wire, plug and socket, always protect them from moisture or water.
• Always turn off gas valve and remove the plug after use.
• Always make sure that you actually see the appliance when you want to switch it on. Never use things like a timer, programmer or any other
device (including Internet apps) that switches on the appliance automatically as this may cause fire!
MAINTENANCE
1. Switch off the gas heater and allow it to cool down for at least 10 minutes before cleaning it.
2. Keep the gas heater clean. Remove any dust and other dirt with a damp cloth. Use regular cleaning products for stubborn stains. Clean the
heater thoroughly once a year.
3. Inspect it each time before using it. Use a mixture of soapy water and water to check the connections for leaks. If any bubbles occur, there is
a leak. It should be repaired immediately.
4. Check the hose / regulator connection each time before using it. If the hose shows any sign of wear and tear or has any cracks, it should be
replaced immediately.
5. The heater should be inspected by a certified service station once a year.
man_GH1142R ('20) V2.indd 29 man_GH1142R ('20) V2.indd 29
4
1 2 3
4
29
25-05-20 14:28 25-05-20 14:28